ECT TESTING

ISO 3035

Ring Crush Test Standard

O nas

Overview of ISO 3035

ISO 3035 specifies a standardized method to measure the flat crush resistance of corrugated fibreboard. This method focuses on single-faced oraz single-wall boards, providing a reliable measure of how fluting withstands perpendicular compressive forces.

In practical application, ISO 3035 testing allows manufacturers to verify if a corrugated board meets the minimum required crush strength, which is critical for stacked pallet shipments. A board that fails to meet the standard can result in product damage or financial losses due to crushed cartons during transport.

Tester zgniatania YSD-01

Importance of Mechanical Testing for Packaging

Mechanical testing evaluates how well packaging materials withstand forces such as stacking, compression, and handling. Tests like flat crush resistance provide insights into the load-bearing capacity of corrugated boards.

For instance, in a study comparing B-flute oraz C-flute boards, C-flute boards exhibited approximately 20% higher flat crush resistance, making them suitable for heavier products. By assessing these properties, manufacturers can reduce product damage, optimize material usage, and ensure compliance with international standards, such as ISO and ASTM packaging regulations.

Overview of Corrugated Board Structures

Different board types influence testing results and applications:

Single-faced boards:

Commonly used as protective layers in multi-packing.

Single-wall (double-faced) boards:

Standard choice for shipping cartons.

Double-wall and microflute boards:

Not covered by ISO 3035 due to unclear collapse endpoints.

For example, testing a single-faced B-flute board may yield a flat crush resistance of 2.5 kN/m, whereas a single-wall C-flute board could reach 3.5 kN/m. Such data guide engineers in choosing boards for heavy-duty packaging versus light consumer goods.

Objaśnienia dotyczące płaskiego testera zgniatania i FCT

Purpose and Significance of ISO 3035 Testing

The main goal of ISO 3035 is to determine the compressive strength of corrugated boards under flat crush conditions. Key benefits include:

Ensuring boxes resist crushing during transport and storage.
Evaluating different board grades or fluting designs.
Optimizing production parameters for material efficiency.
Supporting quality assurance and compliance with international packaging standards.

For example, a logistics company may use ISO 3035 to compare boards under stack heights of 2 m and above, ensuring boxes on the bottom layers maintain integrity and prevent crushing of products above.

Inna metoda testowania zgniatania

Conditioning: Test pieces are equilibrated in a controlled atmosphere, usually 23 ± 2°C with 50 ± 5% relative humidity.
Placement: Pieces are centered on the lower platen.
Compression: Steady perpendicular force is applied until fluting collapse occurs.
Rate of Compression: Platens move at 12.5 mm/min ± 0.25 mm/min.
Measurement: Record maximum force sustained before fluting collapse.
Validation: Rotate samples to correct for leaning flutes and ensure consistent results.

Applicable materials include:

Single-faced corrugated fibreboard
Single-wall corrugated fibreboard (double-faced)

Boards must be free of defects such as tears or uneven fluting. Double-wall or microflute boards are excluded due to ambiguous collapse endpoints, ensuring reproducible and accurate results.

Oher Crush Testing Method

Materials Suitable for ISO 3035 Testing

Modern Equipment for ISO 3035 Testing

Advanced instruments like the Tester zgniatania Cell Instruments YSD-01 offer:

Precise force measurement and platen control
Digital recording and data export
Compatibility with ECT oraz flat crush testing
Reproducible results for both quality control and R&D applications

In practice, using modern equipment allows engineers to automatically generate test reports, analyze trends across multiple production batches, and optimize material performance efficiently.

Tester zgniatania YSD-01

Specyfikacja techniczna

Parametr	Specyfikacja
Obszar testowy	(10±0,05) cm²
Zakres pomiarowy	(1-9999) S, (1-15)S, (15～300) S, (300～9999) S, przełącznik trzyzakresowy
Objętość	Duża próżnia 380±1 ml; Mała próżnia (38±1) ml
Zakres podciśnienia	I bieg 50.66kPa -> 29.33kPa
	II bieg 50.66kPa -> 48kPa
	III bieg: 50,66 kPa -> 48 kPa
Ciśnienie próbne	(100±2) kPa (ciśnienie automatyczne)
Wymiar	380x360x465 mm
Moc	AC 220V 50Hz

Tester zgniatania jest niezbędny dla producentów papieru i opakowań, którzy chcą zapewnić trwałość produktu i spełnić wymagania przepisów branżowych. Testy takie jak ECT, RCToraz FCT stanowią podstawę oceny wyników zarządu, regulowanej przez rygorystyczne standardy, takie jak ISO 3037, TAPPI T811, ISO 3035i nie tylko. Z Tester zgniatania YSD-01 Dzięki Cell Instruments zyskujesz dostęp do kompletnego rozwiązania testowego, które jest dokładne, wszechstronne i zgodne z przepisami - zwiększając zarówno kontrolę jakości, jak i zadowolenie klientów.

- Cell Instruments

Często zadawane pytania dotyczące Crush Tester

What materials can be tested using ISO 3035?

ISO 3035 is suitable for single-faced oraz single-wall (double-faced) corrugated fibreboard. It is not applicable to double-wall or microflute boards because the collapse endpoint is ambiguous. Using standardized materials ensures reliable and reproducible flat crush test results, which are critical for packaging design and quality control.

How is the flat crush resistance measured in ISO 3035?

The flat crush test involves placing a sample centrally on a flat crush tester and applying a perpendicular force at a controlled rate (12.5 mm/min ± 0.25 mm/min) until the fluting collapses. The maximum force recorded represents the board’s resistance. For example, a C-flute board may withstand 320 N, while a B-flute may only reach 260 N, allowing comparisons for packaging applications.

How does ISO 3035 help improve packaging quality?

ISO 3035 testing evaluates the compressive strength of corrugated boards, ensuring boxes withstand stacking and transport stresses. By combining results with ECT testing or ring crush test standard data, manufacturers can select optimal board grades, minimize packaging failures, and ensure consistent protection of products during shipping and storage.

Uzyskaj z nami najlepsze rozwiązanie

Miejmy dalszą komunikację.

Chcesz najpierw porozmawiać?

Czat z nami przez telefon.

Skontaktuj się z nami

No. 5577 Gongyebei Rd, Licheng, Jinan, 250109, Shandong, P.R.C.

marketing@celtec.cn

+86 185 6001 3985